Keep in mind that some monitors have limited bandwidth over HDMI 1.4 making it max out at 120Hz or even at 60Hz in some cases, which are mostly G-SYNC and older monitors. Furthermore, most 144Hz monitors are limited to 120Hz over HDMI 1.4. Still, some monitor manufacturers use custom timing parameters and pixel rates to use the full potential of the HDMI 1.4 bandwidth, thus getting 144Hz at 1080p. That being said, we are now going to show you what to do when your 144Hz monitor is only showing 120Hz or less. Before we begin, though, we’ll also show you how to duplicate 3 monitors on Windows 10 and how to turn on Auto HDR in Windows 11.

Why is my HDMI not allowing 144Hz?

Users that have experienced this problem can understand the frustration that comes with a monitor that isn’t displaying correctly. It all comes down to pairing compatible cables with compatible monitors, so keep this in mind just to avoid nasty surprises. Just make sure the exact monitor you’re looking at supports 144Hz or at least 120Hz over its HDMI 1.4 port, or just look for a 144Hz display with HDMI 2.0. Remember that HDMI 2.0 is also fairly standard and can be used for 240Hz at 1080p, 144Hz at 1440p, and 60Hz at 4K.

What can I do if my HDMI doesn’t allow 144Hz?

1. Check the monitor’s specifications

As we said above, it all starts with choosing the right monitor and the right cables for the job, so we are going to start here. In fact, most 144Hz monitors will connect at that specification on Windows computers by default, so remember that in the future. SPONSORED Thus, if your monitor is not working correctly, check to make sure you have a 144Hz-capable display and have it plugged into the display or DVI-D port. It is also important for you to keep in mind that other display connections will not render at 144Hz. So, before we get further into the troubleshooting process, make sure this is checked.

2. Inspect the cable for any damage

We know that this should go without saying but we can sometimes overlook the simplest details and go through a lot of work. All you need to do is a simple visual inspection and make sure the cable doesn’t have any frays or cuts that could prevent it from working properly. If by chance you find any damage, simply buy another cable and try again. You might find it hard to believe, but some users actually reported that this worked for them after replacing faulty cables.

3. Manually adjust refresh rate settings

4. Update monitor drivers

5. Update Windows

Do I need a special HDMI cable for 144Hz?

Yes, as we mentioned at the beginning of the article, not all cables will suit your needs so make sure you buy the correct one. Disclaimer: this program needs to be upgraded from the free version in order to perform some specific actions. For 144Hz at 1440p, you will need at least HDMI 2.0 or DisplayPort 1.2 while for 4K 144Hz you are going to need HDMI 2.1 or alternatively, DisplayPort 1.4 with DSC 1.2. That is all you need to know about the matter, so you can think twice before getting an HDMI 1.4 cable for a 144Hz refresh rate. We recommend HDMI 2.1 for 144Hz, so don’t even waste your time with anything else. Thus, if your monitor is 144Hz but only has a 60Hz refresh rate, remember what we told you.

SPONSORED Name * Email * Commenting as . Not you? Save information for future comments
Comment

Δ