Usually, when you encounter BSOD, install the update or do a normal restart, your PC should start without any problem. Sometimes, it may run some recovery processes, including disk repair or checking, etc. In this type of situation, the above error may occur. Fortunately, you can solve this error. However, before knowing the solutions, let’s learn about the causes.

Why is CHKDSK not running due to a recently installed software error occurring?

There are some common reasons why you are encountering this CHKDSK error. It includes the followings:

Recently installed update or software: If you have updated Windows recently or installed software, that may be the reason you are getting this CHKDSK error. Recently changed settings: Have you changed any configuration or settings? That may have a direct effect on your disk drive. Excessive bad sectors on HDD: If your HDD has too many bad sectors, it may be another reason. Physical damage on your hard drive: If your SSD or HDD has physical damage or it is very old and needs a replacement, such a CHKDSK cannot run error may appear. Driver problem: Some users reported that some specific drivers could be responsible for this problem. Corrupted system files: If the core components of the Windows system have been corrupted, you may get this type of error.

How do I solve CHKDSK cannot run due to recently installed software?

Before you go through the actual troubleshooting methods, we suggest you ensure the following things:

Back up your data to an external disk or cloud, if possible, using safe mode. Have a Windows bootable media/recovery disk or flash drive. Ensure your HDD/SSD is connected to the motherboard properly. Make sure all of the drivers on your PC are up to date. If necessary, use DriverFix to update them.

These are not strict requirements. But, it may be essential in some situations. After ensuring the above things, proceed to the actual methods.

1. Run chkdsk in Safe Mode or in the Recovery environment

It should not show the CHKDSK error due to recently installed software anymore. If you still get the error, follow the next methods.

2. Uninstall recently installed updates

Then try to run the CHKDSK command and see what happens. However, if you cannot access your PC usually, use the recovery mode technique as suggested in method 1. SPONSORED

3. Uninstall recently installed software

Alternatively, and for a better experience, you should use a tool like IObit Uninstaller or Revo Uninstaller. These can obliterate any software without leaving any leftovers, unlike Windows built-in uninstaller.

4. Do the system restore

If any misconfiguration or changes made recently is causing the problem, the system restore should solve the inability to run the CHKDSK command due to a newly installed software issue.

5. Reset or clean install Windows

If resetting doesn’t solve the issue, consider a clean installation of Windows. If you are interested, learn the differences between Windows 11 reset vs. clean install.

6. Ensure the HDD/SSD is healthy enough

It will give you an idea about the current status of your disk drive. However, we suggest you depend on any HDD health check tools for more in-depth analysis. If it is a hard disk damage, you must replace it. Otherwise, the CHKDSK cannot run due to errors will appear repeatedly, and at a time, you won’t be able to use your PC anymore before installing a new disk drive. If necessary, learn about the best SSDs for Windows 11. This article has shown how you can fix CHKDSK cannot run due to recently installed software. If you know of other better methods, let us know in the comment box.

SPONSORED Name * Email * Commenting as . Not you? Save information for future comments
Comment

Δ